Aquafog 700 Bench Top

The Bench Top unit will conveniently sit on flat surfaces or shelve. Bench Top is extremely easy to set up and operate. Units also reuse their condensation waste water, eliminating the need of a near by drain. Bench Top units fill automatically by means of an internal float valve and come equipped with a simple garden hose connection. A quarter-turn valve controls the fogging output.

Click on picture for a larger view

Fogging Capacity	0-3 Gallons per hour
CFM Rating	1,125 Cubic Feet per minute
Energy Consumption	1.8 Amps @ 115V
Noise @ 10'	62dB(a)
Weight	18.5 pounds
Dimensions	18" in width and 18" in depth and 25" in height
Voltage	110-128 Volts, 60 Hz, 1 ph
Coverage	About 500 sq ft for Humidification Applications About 300 sq ft for Evaporative Cooling Applications

$579.00 including shipping to Continental US

Accessories for the Bench Top Model

These controllers are compatible with the Bench Top or Hanging Sump models only.

Pre Wired Humidistat

pre wired humidistat

This pre-wired humidistat is an ideal means of control for the Aquafog® 700 in all applications requiring 85% or less relative humidity. Automatically controls your Aquafog 700 for most humidification and indoor cooling applications. It incorporates a fast-acting man-made sensing element with large easy access control dial. Designed to endure high humidity levels, this control unit requires no wiring and comes supplied with a convenient pre-wired piggy-back electrical plug.

$109.00 including shipping to Continental US

Pre Wired Thermostat

pre wired thermostat

If your primary interest is in evaporative cooling, this pre-wired thermostat control is what you may need to automate your Aquafog 700. Watertight Nema 4X enclosure works great for indoor or outdoor cooling applications. Simply dial the desired temperature setting you would like the Aquafog 700 to turn on at and this thermostat control will automate your Aquafog with a precise control of +/- 2°F.
Designed to endure high humidity or outdoor conditions, this control requires no wiring and comes supplied with a convenient pre-wired piggyback electrical plug.

$119.00 including shipping to Continental US

Cycle Timer Control

pre wired cycle timer

If you want to maintain very high humid environments above 85% (RH) relative humidity, then the Cycle Timer may be the control you are looking for to automate your Aquafog 700. The watertight Nema 4X enclosure works ideal for indoor high humidity environments. The two knob control system, allows you to simply dial the desired amount of on /vs off time to set the desired cycles. The mode button lets you choose between four different time ranges from 5 to 60 minutes. Designed to endure high humidity conditions, this control requires no wiring and comes supplied with a convenient pre-wired piggyback electrical plug.

$159.00 including shipping to Continental US

Mini Oscillator

mini oscilator

This dependable indoor/outdoor oscillator is ideal for many evaporative cooling and humidification applications. Mini 360 Oscillator will provide a dwell-free sweeping movement for the Aquafog 700. Evenly disperse the misty cool fog over a large area with slow consistent sweeping movement. Mini 360 Oscillator quickly installs between a support and the Aquafog 700. (6) Sweep settings ranging from 60 to 360º.
Separate 12' power supply cord.

$213.00 including shipping to Continental US